{"product_id":"icon-21-up-ford-bronco-2-3in-front-25-vs-rr-cdev-coilover-kit-487390-t14","title":"ICON 21-UP Ford Bronco 2-3in Front 2.5 VS RR CDEV COILOVER KIT","description":"\u003ch3\u003e\u003cstrong\u003eManufacturer Part # : 48700E\u003c\/strong\u003e\u003c\/h3\u003e\u003cbr\u003e\u003ch2\u003eMarket Description\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eICON Vehicle Dynamics V.S. 2.5 Series remote reservoir front coilover shocks with CDEV are the ideal upgrade for the front end of the 2021-2023 Ford Bronco. These adjustable coilovers allow up to 3-4” of lift height adjustability on Broncos without the Sasquatch package or 2-3” of lift over stock Sasquatch equipped Broncos, allowing the use of larger, more aggressive wheel and tire combinations. ICON’s Vehicle-specific shock length and valving along with the larger 2.5” shock body and increased piston area over stock components yield the maximum travel possible along with superior ride quality and suspension performance both on- and off-road. Reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade. ICON's exclusive Compression Damping Electronic Valves (CDEV) are included to allow for lightning fast, precise electronic shock tuning, on-the-fly, at any speed and in any terrain. Focus on driving and let ICON Intelligent Control (IIC) read the terrain and make near-instant adjustments via the CDEV at each individual shock. Control the system wirelessly through the IIC app on your phone and once configured the system functions without driver input. ICON 2.5 Series rear coilovers with CDEV and matching IIC module are required for installation but vehicle control will be actively balanced front to rear, resulting in the best overall driving experience for your Ford Bronco.\u003c\/li\u003e\n  \u003cli\u003eICON Vehicle Dynamics V.S. 2.5 Series remote reservoir front coilover shocks with CDEV are the ideal upgrade for the front end of the 2021-UP Ford Bronco. These adjustable coilovers allow up to 3-4” of lift height adjustability on Broncos without the Sasquatch package or 2-3” of lift over stock Sasquatch equipped Broncos, allowing the use of larger, more aggressive wheel and tire combinations. ICON’s Vehicle-specific shock length and valving along with the larger 2.5” shock body and increased piston area over stock components yield the maximum travel possible along with superior ride quality and suspension performance both on- and off-road. Reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade. ICON's exclusive Compression Damping Electronic Valves (CDEV) are included to allow for lightning fast, precise electronic shock tuning, on-the-fly, at any speed and in any terrain. Focus on driving and let ICON Intelligent Control (IIC) read the terrain and make near-instant adjustments via the CDEV at each individual shock. Control the system wirelessly through the IIC app on your phone and once configured the system functions without driver input. ICON 2.5 Series rear coilovers with CDEV and matching IIC module are required for installation but vehicle control will be actively balanced front to rear, resulting in the best overall driving experience for your Ford Bronco.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAssociated Comments\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eTECH NOTE: Due to increased wheel travel and lift height provided by these coilovers, ICON upper control arms with Delta Joint Pro, part numbers 48400DJ or 48500DJ, are recommended. Other aftermarket front upper control arms may not be compatible and it is the duty of the installer to verify fitment. Failure to cycle suspension and check for ball joint bind issues may lead to component failure and\/or injury.\u003c\/li\u003e\n  \u003cli\u003eRecommended Aftermarket Tires (Without Sasquatch Package): 35\" x 12.50\" (Recommend high clearance crash bars part number 42000, 37\" tires require coilover bump stop spacers along with trimming and modifications)\u003c\/li\u003e\n  \u003cli\u003eTECH NOTE: Fitment testing done with ICON \u0026amp; OE steering components. Due to tight clearances to front coilovers, certain aftermarket steering components may not be compatible.\u003c\/li\u003e\n  \u003cli\u003eRecommended Aftermarket Tires (With Sasquatch Package): 35\" x 12.50\" (37\" tires require coilover bump stop spacers along with minor trimming)\u003c\/li\u003e\n  \u003cli\u003eAPPLICATION NOTE #24: Factory UCA's Will Not Align Properly Past 2.5” Of Lift. Above 2.5” Of Lift An Aftermarket UCA Is Recommended.\u003c\/li\u003e\n  \u003cli\u003eTECH NOTE: Also requires installation of IIC kit part number 43501 and CDEV rear coilovers part number 48710E or 48711E\u003c\/li\u003e\n  \u003cli\u003eAPPLICATION NOTE #138: Recommended crash bars part #42000 on Non-Sasquatch equipped vehicles when running 35\" tires\u003c\/li\u003e\n  \u003cli\u003eRecommended Aftermarket Wheels (Without Sasquatch Package): ICON Alloys - 17x8.5\" w\/ 5.75\" Backspace \/ 25mm Offset\u003c\/li\u003e\n  \u003cli\u003eRecommended Aftermarket Wheels (Without Sasquatch Package): ICON Alloys - 18x9\" w\/ 6.00\" Backspace \/ 25mm Offset\u003c\/li\u003e\n  \u003cli\u003eAPPLICATION NOTE #55: Shocks are fully serviceable. Coilover heights indicated are for a stock equipped vehicle\u003c\/li\u003e\n  \u003cli\u003eRecommended Aftermarket Wheels (With Sasquatch Package): ICON Alloys - 17x8.5\" w\/ 4.75\" Backspace \/ 0mm Offset\u003c\/li\u003e\n  \u003cli\u003eRecommended Aftermarket Wheels (With Sasquatch Package): ICON Alloys - 18x9\" w\/ 5.00\" Backspace \/ 0mm Offset\u003c\/li\u003e\n  \u003cli\u003eRecommended Aftermarket Wheels (With Sasquatch Package): ICON Alloys - 20x9\" w\/ 5.00\" Backspace \/ 0mm Offset\u003c\/li\u003e\n  \u003cli\u003eAPPLICATION NOTE #139: When running 37\" tires crash bar removal may be required but is not recommended\u003c\/li\u003e\n  \u003cli\u003eAPPLICATION NOTE #132: When running 37\" tires use up travel limiters part #611075 in the front\u003c\/li\u003e\n  \u003cli\u003eTECH NOTE: An iOS operated device is required to run ICON Intelligent Control App\u003c\/li\u003e\n  \u003cli\u003eTECH NOTE: Bronco Everglades will have lift height range of 1.5-2.5\" over stock\u003c\/li\u003e\n  \u003cli\u003eTECH NOTE: Only compatible with models equipped with 2.7L EcoBoost engine\u003c\/li\u003e\n  \u003cli\u003eOEM Wheels \u0026amp; Tires Fitment (Without Sasquatch Package): No\u003c\/li\u003e\n  \u003cli\u003eOEM Wheels \u0026amp; Tires Fitment (With Sasquatch Package): Yes\u003c\/li\u003e\n  \u003cli\u003eTECH NOTE: Not compatible with Bronco Raptor\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Extended\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eThese ICON coilovers feature 2.5 Series shocks and coil springs optimized per application. These hardcore units are outfitted with remote reservoirs to stay cooler during intense wheeling and ICON’s CDEV for active compression adjustment\u003c\/li\u003e\n  \u003cli\u003e2021-UP FORD BRONCO FRONT 2.5 VS REMOTE RESERVOIR COILOVER KIT WITH CDEV\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures and Benefits\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eICON Intelligent Control (IIC) uses onboard sensors to monitor G-forces and movement of vehicle chassis along with user defined settings to actively make near instantaneous compression damping changes\u003c\/li\u003e\n  \u003cli\u003eICON's CDE Valve technology allows for in vehicle adjustment of compression damping settings and active adjustment via the ICON Intelligent Control (IIC)\u003c\/li\u003e\n  \u003cli\u003eAdjustable up to 3-4\" of front lift height on non-Sasquatch or 2-3” of front lift on Sasquatch Broncos\u003c\/li\u003e\n  \u003cli\u003eRemote reservoirs maintain cooler operating temperatures during extended off-road use\u003c\/li\u003e\n  \u003cli\u003e100% Bolt-on - no drilling, cutting or welding necessary for installation\u003c\/li\u003e\n  \u003cli\u003eCorrosion resistant CAD plated shock bodies with 7\/8\" diameter shafts\u003c\/li\u003e\n  \u003cli\u003eIncreased wheel travel (up to 11.5”) and ride quality over stock\u003c\/li\u003e\n  \u003cli\u003eFK rod end bearings for extended longevity and minimal deflection\u003c\/li\u003e\n  \u003cli\u003eVehicle specific tuned for superior shock damping and control\u003c\/li\u003e\n  \u003cli\u003e6061 Aircraft grade aluminum CNC machined components\u003c\/li\u003e\n  \u003cli\u003eHigh strength alloy CNC machined lower bar pin\u003c\/li\u003e\n  \u003cli\u003eFully rebuildable and re-tunable\u003c\/li\u003e\n  \u003cli\u003eICON engineered coil springs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Short\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eICON 21-UP Ford Bronco 2-3in Front 2.5 VS RR CDEV COILOVER KIT\u003c\/li\u003e\n  \u003cli\u003eCDEV COILOVER KIT\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Long\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e21-23 BRONCO FRONT 2.5 VS RR CDEV COILOVER KIT\u003c\/li\u003e\n  \u003cli\u003e21-UP BRONCO FRONT 2.5 VS RR CDEV COILOVER KIT\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Invoice\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eBRONCO FRONT 2.5 RR CDEV COILOVER KIT\u003c\/li\u003e\n  \u003cli\u003e48700E\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAAIA Part Type Description\u003c\/h2\u003e\n\u003cp\u003eCoilover Set\u003c\/p\u003e","brand":"ICON","offers":[{"title":"Default Title","offer_id":47191713218698,"sku":"T14.487390","price":2892.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/4599\/4122\/files\/c252a11e1902ce9cbafc16b1144d26cf.jpg?v=1760759029","url":"https:\/\/www.sbxperformance.com\/products\/icon-21-up-ford-bronco-2-3in-front-25-vs-rr-cdev-coilover-kit-487390-t14","provider":"SBX Performance","version":"1.0","type":"link"}