{"product_id":"icon-21-up-ford-bronco-2-3in-rear-25-vs-rr-cdcv-coilover-kit-487392-t14","title":"ICON 21-UP Ford Bronco 2-3in Rear 2.5 VS RR CDCV COILOVER KIT","description":"\u003ch3\u003e\u003cstrong\u003eManufacturer Part # : 48710C\u003c\/strong\u003e\u003c\/h3\u003e\u003cbr\u003e\u003ch2\u003eMarket Description\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eICON Vehicle Dynamics V.S. 2.5 Series remote reservoir rear coilover shocks with CDCV are an incredible upgrade for the rear end of the 2021-2023 Ford Bronco. These adjustable coilovers allow up to 2-3” of rear lift height adjustability on 4-door Broncos without the Sasquatch package or 1.25-2.25” of rear lift over stock 4-door Sasquatch equipped Broncos, allowing the use of larger, more aggressive wheel and tire combinations. ICON’s Vehicle-specific shock length and valving along with the larger 2.5” shock body and increased piston area over stock components yield the maximum travel possible along with superior ride quality and suspension performance both on- and off-road. Reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade. ICON's exclusive Compression Damping Control Valves are included for precisely dialing in your suspension performance. CDCV controls fluid flow under compression, allowing you to achieve the perfect tune whether driving on the street, slow-crawling through the rocks or mobbing across the desert at full throttle. These rear coilovers are mounted in a shaft up orientation and feature unique ICON engineered progressive triple rate coil springs, allowing for softer spring rate at ride height that ramps up as the coil compresses for improved bottom out resistance. This shaft up orientation also requires the reservoir hose to be routed along the rear lower links so ICON offers hose bracket options for the OE or ICON tubular links while ICON billet links incorporate this bracketry into their design. When paired with ICON 2.5 Series front coilovers vehicle control will be balanced front to rear, resulting in the best overall driving experience for your Ford Bronco.\u003c\/li\u003e\n  \u003cli\u003eICON Vehicle Dynamics V.S. 2.5 Series remote reservoir rear coilover shocks with CDCV are an incredible upgrade for the rear end of the 2021-UP Ford Bronco. These adjustable coilovers allow up to 2-3” of rear lift height adjustability on 4-door Broncos without the Sasquatch package or 1.25-2.25” of rear lift over stock 4-door Sasquatch equipped Broncos, allowing the use of larger, more aggressive wheel and tire combinations. ICON’s Vehicle-specific shock length and valving along with the larger 2.5” shock body and increased piston area over stock components yield the maximum travel possible along with superior ride quality and suspension performance both on- and off-road. Reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade. ICON's exclusive Compression Damping Control Valves are included for precisely dialing in your suspension performance. CDCV controls fluid flow under compression, allowing you to achieve the perfect tune whether driving on the street, slow-crawling through the rocks or mobbing across the desert at full throttle. These rear coilovers are mounted in a shaft up orientation and feature unique ICON engineered progressive triple rate coil springs, allowing for softer spring rate at ride height that ramps up as the coil compresses for improved bottom out resistance. This shaft up orientation also requires the reservoir hose to be routed along the rear lower links so ICON offers hose bracket options for the OE or ICON tubular links while ICON billet links incorporate this bracketry into their design. When paired with ICON 2.5 Series front coilovers vehicle control will be balanced front to rear, resulting in the best overall driving experience for your Ford Bronco.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAssociated Comments\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eTECH NOTE: Triple rate rear coils are optimized for improved suspension performance and ride quality for a near-stock weight Bronco. Their softer initial spring rates will net lower than advertised ride heights as weight is added to the rear of the vehicle. For heavier equipped Broncos, consider part number 48711C.\u003c\/li\u003e\n  \u003cli\u003eAPPLICATION NOTE #186: Rear reservoir brackets may interfere with some aftermarket step or rock slider mounts. Modifications may be required.\u003c\/li\u003e\n  \u003cli\u003eTECH NOTE: Lift height ranges advertised are for 4-door models. 2-door models will net approximately .5\" of additional rear lift over stock.\u003c\/li\u003e\n  \u003cli\u003eRecommended Aftermarket Tires (Without Sasquatch Package): 35\" x 12.50\" (37\" tires require coilover bump stop spacers)\u003c\/li\u003e\n  \u003cli\u003eRecommended Aftermarket Tires (With Sasquatch Package): 35\" x 12.50\" (37\" tires require coilover bump stop spacers)\u003c\/li\u003e\n  \u003cli\u003eRecommended Aftermarket Wheels (Without Sasquatch Package): ICON Alloys - 17x8.5\" w\/ 5.75\" Backspace \/ 25mm Offset\u003c\/li\u003e\n  \u003cli\u003eRecommended Aftermarket Wheels (Without Sasquatch Package): ICON Alloys - 18x9\" w\/ 6.00\" Backspace \/ 25mm Offset\u003c\/li\u003e\n  \u003cli\u003eAPPLICATION NOTE #55: Shocks are fully serviceable. Coilover heights indicated are for a stock equipped vehicle\u003c\/li\u003e\n  \u003cli\u003eRecommended Aftermarket Wheels (With Sasquatch Package): ICON Alloys - 17x8.5\" w\/ 4.75\" Backspace \/ 0mm Offset\u003c\/li\u003e\n  \u003cli\u003eRecommended Aftermarket Wheels (With Sasquatch Package): ICON Alloys - 18x9\" w\/ 5.00\" Backspace \/ 0mm Offset\u003c\/li\u003e\n  \u003cli\u003eRecommended Aftermarket Wheels (With Sasquatch Package): ICON Alloys - 20x9\" w\/ 5.00\" Backspace \/ 0mm Offset\u003c\/li\u003e\n  \u003cli\u003eAPPLICATION NOTE #133: When Running 37\" Tires Use Up Travel Limiter's Part #611074 For The Rear\u003c\/li\u003e\n  \u003cli\u003eAPPLICATION NOTE #136: When Running ICON Tubular Lower Links Use Part #611073\u003c\/li\u003e\n  \u003cli\u003eAPPLICATION NOTE #137: When Running Factory Lower Links Use Part #611072\u003c\/li\u003e\n  \u003cli\u003eAPPLICATION NOTE #66: 2 door models will sit taller than 4 door models\u003c\/li\u003e\n  \u003cli\u003eTECH NOTE: Not compatible with Bronco Raptor trim\u003c\/li\u003e\n  \u003cli\u003eTECH NOTE: Not compatible with Bronco Raptor\u003c\/li\u003e\n  \u003cli\u003eOEM Wheels \u0026amp; Tires Fitment: Yes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Extended\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eThese ICON coilovers feature 2.5 Series shocks with remote reservoirs and coil springs optimized per application. The shock’s bigger 2.5” body and larger piston area improves damping ability and ride quality across varying types of terrain.\u003c\/li\u003e\n  \u003cli\u003e2021-UP FORD BRONCO REAR 2.5 VS REMOTE RESERVOIR COILOVER KIT WITH CDCV\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures and Benefits\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eAdjustable up to 2-3\" of rear lift height on non-Sasquatch or 1.25-2.25” of rear lift on Sasquatch Broncos\u003c\/li\u003e\n  \u003cli\u003eRemote reservoirs maintain cooler operating temperatures during extended off-road use\u003c\/li\u003e\n  \u003cli\u003eICON CDCV equipped for 10 settings of external compression damping adjustment\u003c\/li\u003e\n  \u003cli\u003e100% Bolt-on - no drilling, cutting or welding necessary for installation\u003c\/li\u003e\n  \u003cli\u003eCorrosion resistant CAD plated shock bodies with 7\/8\" diameter shaft\u003c\/li\u003e\n  \u003cli\u003eFK rod end bearings for extended longevity and minimal deflection\u003c\/li\u003e\n  \u003cli\u003eIncreased wheel travel (up to 14”) and ride quality over stock\u003c\/li\u003e\n  \u003cli\u003eVehicle specific tuned for superior shock damping and control\u003c\/li\u003e\n  \u003cli\u003e6061 Aircraft grade aluminum CNC machined components\u003c\/li\u003e\n  \u003cli\u003eUnique ICON engineered triple rate coil springs\u003c\/li\u003e\n  \u003cli\u003eFully rebuildable and re-tunable\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Short\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eICON 21-UP Ford Bronco 2-3in Rear 2.5 VS RR CDCV COILOVER KIT\u003c\/li\u003e\n  \u003cli\u003eCDCV COILOVER KIT\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Long\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e21-23 BRONCO REAR 2.5 VS RR CDCV COILOVER KIT\u003c\/li\u003e\n  \u003cli\u003e21-UP BRONCO REAR 2.5 VS RR CDCV COILOVER KIT\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Invoice\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eBRONCO REAR 2.5 RR CDCV COILOVER KIT\u003c\/li\u003e\n  \u003cli\u003e48710C\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAAIA Part Type Description\u003c\/h2\u003e\n\u003cp\u003eCoilover Set\u003c\/p\u003e","brand":"ICON","offers":[{"title":"Default Title","offer_id":47191665934474,"sku":"T14.487392","price":2471.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0688\/4599\/4122\/files\/483a620e430dbb1e61f05e7440fe9b1b_78e22475-fc16-45e6-b879-32cbbd577786.jpg?v=1760757671","url":"https:\/\/www.sbxperformance.com\/products\/icon-21-up-ford-bronco-2-3in-rear-25-vs-rr-cdcv-coilover-kit-487392-t14","provider":"SBX Performance","version":"1.0","type":"link"}