{"product_id":"sbx-signature-pvd-black-grade-5-titanium-turbo-inlet-bolts-m8-x-1-25-x-25mm","title":"SBX Signature PVD Black Grade 5 Titanium Turbo Inlet Bolts - M8 x 1.25 x 25mm","description":"\u003ch2\u003eSBX Signature PVD Black Grade 5 Titanium Turbo Inlet Bolts | M8 x 1.25 x 25mm | Sold as a Pair\u003c\/h2\u003e\n\n\u003cp\u003eThese are the bolts that attach the turbo inlet pipe to the turbo on the FL5. Nobody thinks about them until they're trying to back one out of a hot engine bay and it's fighting them the whole way. Factory hardware sits right in the heat and corrodes, and once the head starts to round off you're into a much worse afternoon than you planned on.\u003c\/p\u003e\n\n\u003cp\u003eThese are machined from Grade 5 Ti-6Al-4V titanium and finished in our satin PVD black. Titanium doesn't rust or seize the way plated steel does, so they come out as easily as they went in the next time you're in there, whether that's an inlet pipe swap, a turbo blanket, or just chasing a boost leak. They're lighter than the steel bolts too. Nobody's buying titanium hardware for the weight savings on two bolts, but it's a real difference and the finish looks right next to a black inlet pipe.\u003c\/p\u003e\n\n\u003cp\u003eSold as a pair, which is what one inlet pipe takes.\u003c\/p\u003e\n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGrade 5 Ti-6Al-4V aerospace grade titanium\u003c\/li\u003e\n\u003cli\u003eSBX Signature satin PVD black finish\u003c\/li\u003e\n\u003cli\u003eM8 x 1.25 thread\u003c\/li\u003e\n\u003cli\u003e25mm length\u003c\/li\u003e\n\u003cli\u003eDirect replacement for the factory turbo inlet pipe bolts\u003c\/li\u003e\n\u003cli\u003eWon't corrode or seize like plated steel factory hardware\u003c\/li\u003e\n\u003cli\u003eExcellent resistance to heat, moisture, road salt, and chemicals\u003c\/li\u003e\n\u003cli\u003eSold as a set of 2, enough for one inlet pipe\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003e2023+ Honda Civic Type R FL5, turbo inlet pipe to turbo.\u003c\/p\u003e\n\u003cp\u003eCheck your own hardware before ordering if you're running an aftermarket inlet pipe, since some of them use a different bolt length than the factory piece.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eHand start both bolts so you don't cross thread the turbo housing. Use anti seize rated for titanium on the threads. Torque to the factory specification for the inlet pipe fasteners and don't guess at it, titanium threads into aluminum doesn't leave you much room for error. Skip the impact gun on final install, it'll mark up the PVD finish and it's very easy to overshoot torque on a fastener this small.\u003c\/p\u003e","brand":"SBX Performance","offers":[{"title":"Set of 2","offer_id":50119763427466,"sku":"SBX-TI-BOLT-BLK-M8-2","price":18.99,"currency_code":"USD","in_stock":true}],"url":"https:\/\/www.sbxperformance.com\/products\/sbx-signature-pvd-black-grade-5-titanium-turbo-inlet-bolts-m8-x-1-25-x-25mm","provider":"SBX Performance","version":"1.0","type":"link"}