S&B 2011-2014 Ford F-150 3.5L EcoBoost Cold Air Intake

The factory air intake on the 2011-2014 F-150 3.5L EcoBoost wasn't built with performance in mind. Ford designed it to be quiet and cost-effective, which means a small, constricted inlet and a filter that flows well below what this motor is capable of moving. If you're running a tune, upgraded turbos, or just want to get the most out of the stock power plant, the OE airbox is one of the first things holding you back.

S&B addressed the inlet restriction problem with a custom-molded rubber piece that uses a generous radius to smooth airflow into the airbox. Compared to the stock inlet, that's a 48% reduction in restriction right at the point of entry. From there, the intake tube routes through the airbox wall via a silicone cuff, a design that physically isolates the tube from engine movement and vibration while blocking heat soak from the engine bay. The result is denser, cooler air reaching the turbos without the resonance issues you'd get with a hard-pipe-only design.

Tested to ISO 5011 standards, the cotton cleanable filter pulls 28.33% more airflow than stock at 99.29% filtration efficiency. The filter is S&B's KF-1058 element, washable and re-oilable. One thing worth noting: S&B engineered a single kit to cover the full 2011-2014 model run. The box includes mounting hardware for both MAF sensor configurations and the pressure sensor, so you're covered regardless of the build year you're working with.

This is the right intake if you want a bolt-on airflow upgrade that doesn't compromise filtration, works with a tune or without one, and passes in states that require emissions compliance. It's a solid foundation piece for any 3.5L EcoBoost F-150 build.

Application List

• 2011-2014 Ford F-150 3.5L EcoBoost

• 28.33% airflow improvement: Tested to ISO 5011. More air means more to work with when your tune is asking for it.
• Silicone cuff airbox pass-through: The intake tube passes through the airbox wall via an engineered silicone cuff. This isolates the tube from engine vibration and acts as a thermal barrier against hot underhood air infiltrating the intake path.
• Custom-molded rubber inlet, 48% less restrictive than stock: The factory inlet is a known chokepoint. S&B replaced it with a piece designed specifically for this application, with a larger radius that smooths airflow entry instead of forcing it through a tight bend.
• Cotton cleanable filter: The oiled cotton filter is washable and re-oilable. Comes with 80g of red oil included. CARB-exempt under EO D-590-30 and street legal in all 50 states.
• CARB exempt (EO D-590-30), street legal in all 50 states: You can run this legally in California and every other state. No emissions compliance concerns at inspection.
• 99.29% filtration efficiency: More airflow without sacrificing filtration. The cotton cleanable filter keeps fine particulates out of your turbos and combustion chambers where they'd do real damage.
• Aggressive intake sound: The larger tube and filter element produce a noticeably louder induction sound than stock under boost.
• Million Mile Warranty: S&B stands behind their intake systems with a Million Mile Warranty. Buy it once, run it for the long haul.

Will this fit my specific 2011, 2012, 2013, or 2014 F-150 3.5L EcoBoost without any modification?

Yes. S&B engineered the 75-5067 to cover all four model years with a single kit. It includes both MAF and pressure sensor mounting hardware, so year-specific sensor differences are already accounted for. No drilling, no fabrication.

How difficult is the install? Do I need special tools?

This is a basic hand-tool install. If you're comfortable swapping out a stock airbox, this is the same level of difficulty. S&B provides written install instructions and a video walkthrough for this specific application.

Is this CARB compliant? Can I run it in California?

Yes. The 75-5067 carries CARB Executive Order D-590-30 and is street legal in all 50 states.

Prop 65 Warning

WARNING: This product can expose you to chemicals including carbon black, silica - crystalline, methylene chloride, and lead which are known to the State of California to cause cancer, and lead, which is known to the State of California to cause birth defects or other reproductive harm. MORE INFO at www.P65warnings.ca.gov

Looking to ensure you get the perfect part for your unique application the first time? Full-Race is here to help.

Email us at gofaster@full-race.com or call us at (602) 437-2101 to find out how we can help you achieve your goals.

Make sure to tag and follow us on Instagram & Facebook to get featured! @fullracemotorsports